Historical instructor

TERRY MANN

Adjusted rating
RMP difficulty
captured reviews
About this rating

Raw average: 4.30/5 from 20 quality ratings. The adjusted rating blends this with the UW review average (3.66/5), weighted as 20 additional ratings. Smaller samples stay closer to that average. Each captured review is counted once in the prior; this does not correct who chooses to leave a review.

RMP profile ↗ · All captured review dates; profile matched by name.

What students say

Original student reviews · all captured dates

ISYE 315
Quality 5/5Difficulty 3/5
Terry is the MAN, literally. He was a great professor and definitely provides a neat perspective as a consultant. The project is lengthy and intense, when he says to start early, LISTEN. He is interesting and cares about his student's success. Helpful in office hours and in lecture. If you go to lecture and discussion, the exams will be easy.
Rate My Professors ↗
ISYE 315
Quality 5/5Difficulty 2/5
Great! Terry was super nice, knew how to answer questions well, and his exams were extremely fair - you have a lot of practice on the exact stuff which will show up on an exam and he doesn't test you on anything you didn't explicitly cover. The homework assigned and project requirements are very extensive and time consuming, so prepare for that.
Rate My Professors ↗
ISYE 520
Quality 4/5Difficulty 3/5
He has a super strict attendance policy (no excused absences) which is stressful, leads to people coming in sick, etc. However, the man knows what he's talking about, loves to answer questions, etc. Assignment details were confusing/difficult to find but he was always happy to clarify.
Rate My Professors ↗
ISYE 315
Quality 3/5Difficulty 3/5
Overall, Terry is a good professor. His lectures are pretty dull but that's primarily thanks to the content of 315. The project for the class is extremely time-consuming and very little guidance is given so be prepared to go to office hours. Not my favorite class, but as a consultant Terry did add some interesting perspective.
Rate My Professors ↗
ISYE 315
Quality 5/5Difficulty 1/5
Terry is one of the best profs I've had at UW. He's a part time professor and also a consultant, so he has awesome real world examples. He gives tons of extra credit, so take advantage. There's a lot of info in the class but if you just read the lecture slides and go to discussion you'll do well. Discussion was huge for application of formulas
Rate My Professors ↗

Personal experiences, not a representative survey. Profile matching and captured coverage are shown in the source details.

Classes with TERRY MANN

EPD 518

Quality Engineering and Quality Management

Credits unavailable

EPD 518: QUALITY ENGINEERING AND QUALITY MANAGEMENT enhances basic business and decision-making skills related to quality systems and process improvement.

No offering record · Spring 2026

with this instructor · course overall, matching historical terms

Terry Mann

historical GPA · grades

Spring 2022–Spring 2026
ISYE 450

Industrial Engineering Design II

3 credits

ISYE 450 is a team-based course where students address real-world design challenges from external organizations by applying industrial and systems engineering methodologies.

No offering record · Spring 2026

with this instructor · course overall, matching historical terms

Terry MannSinan Tas

historical GPA · grades

Fall 2021–Spring 2026

Recorded teaching history

Distinct courses recorded per term

Explore courses taught by this instructor →
Browse recorded courses
TermCourseTitle
Spring 2026EPD 518Quality Engineering and Quality Management
Spring 2026ISYE 450Industrial Engineering Design II
Fall 2025ISYE 515Engineering Management of Continuous Process Improvement
Fall 2025ISYE 520Quality Assurance Systems
Fall 2025ISYE 618Quality Engineering and Quality Management
Spring 2025EPD 518Quality Engineering and Quality Management
Spring 2025ISYE 315Production Planning and Control
Spring 2025ISYE 450Industrial Engineering Design II
Fall 2024ISYE 515Engineering Management of Continuous Process Improvement
Fall 2024ISYE 520Quality Assurance Systems
Fall 2024ISYE 618Quality Engineering and Quality Management
Spring 2024EPD 518Quality Engineering and Quality Management
Spring 2024ISYE 315Production Planning and Control
Spring 2024ISYE 450Industrial Engineering Design II
Fall 2023ISYE 450Industrial Engineering Design II
Fall 2023ISYE 520Quality Assurance Systems
Fall 2023ISYE 618Quality Engineering and Quality Management
Spring 2023EPD 518Quality Engineering and Quality Management
Spring 2023ISYE 315Production Planning and Control
Spring 2023ISYE 450Industrial Engineering Design II
Fall 2022ISYE 515Engineering Management of Continuous Process Improvement
Fall 2022ISYE 520Quality Assurance Systems
Fall 2022ISYE 618Quality Engineering and Quality Management
Spring 2022EPD 518Quality Engineering and Quality Management
Spring 2022ISYE 315Production Planning and Control
Spring 2022ISYE 450Industrial Engineering Design II
Fall 2021ISYE 515Engineering Management of Continuous Process Improvement
Fall 2021ISYE 520Quality Assurance Systems
Fall 2021ISYE 618Quality Engineering and Quality Management
Fall 2020EPD 518Quality Engineering and Quality Management
Fall 2020ISYE 315Production Planning and Control
Fall 2020ISYE 515Engineering Management of Continuous Process Improvement
Spring 2020EPD 518Quality Engineering and Quality Management
Spring 2020ISYE 315Production Planning and Control
Spring 2020ISYE 450Industrial Engineering Design II
Spring 2020ISYE 520Quality Assurance Systems
Fall 2019EPD 518Quality Engineering and Quality Management
Fall 2019ISYE 315Production Planning and Control
Fall 2019ISYE 515Engineering Management of Continuous Process Improvement
Spring 2019EPD 518Quality Engineering and Quality Management
Spring 2019ISYE 315Production Planning and Control
Spring 2019ISYE 520Quality Assurance Systems
Fall 2018EPD 518Quality Engineering and Quality Management
Fall 2018ISYE 315Production Planning and Control
Fall 2018ISYE 515Engineering Management of Continuous Process Improvement
Spring 2018ISYE 315Production Planning and Control
Spring 2018ISYE 515Engineering Management of Continuous Process Improvement
Spring 2018ISYE 575Introduction to Quality Engineering
Spring 2018ISYE 699Advanced Independent Study
Fall 2017EPD 518Quality Engineering and Quality Management
Fall 2017ISYE 315Production Planning and Control
Fall 2017ISYE 515Engineering Management of Continuous Process Improvement
Spring 2017ISYE 313Engineering Economic Analysis
Spring 2017ISYE 315Production Planning and Control
Spring 2017ISYE 575Introduction to Quality Engineering
Fall 2016ISYE 313Engineering Economic Analysis
Fall 2016ISYE 315Production Planning and Control
Fall 2016ISYE 515Engineering Management of Continuous Process Improvement
Fall 2016ISYE 699Advanced Independent Study
Spring 2016ISYE 315Production Planning and Control
Spring 2016ISYE 515Engineering Management of Continuous Process Improvement
Spring 2016ISYE 575Introduction to Quality Engineering
Fall 2015ISYE 315Production Planning and Control
Fall 2015ISYE 515Engineering Management of Continuous Process Improvement
Spring 2015ISYE 313Engineering Economic Analysis
Spring 2015ISYE 315Production Planning and Control
Spring 2015ISYE 575Introduction to Quality Engineering
Fall 2014ISYE 315Production Planning and Control
Fall 2014ISYE 520Quality Assurance Systems
Spring 2014ISYE 313Engineering Economic Analysis
Spring 2014ISYE 315Production Planning and Control
Spring 2014ISYE 575Introduction to Quality Engineering
Fall 2013ISYE 315Production Planning and Control
Fall 2013ISYE 520Quality Assurance Systems
Fall 2013ISYE 699Advanced Independent Study
Spring 2013ISYE 315Production Planning and Control
Spring 2013ISYE 575Introduction to Quality Engineering
Spring 2013ISYE 699Advanced Independent Study
Fall 2012ISYE 313Engineering Economic Analysis
Fall 2012ISYE 315Production Planning and Control
Fall 2012ISYE 699Advanced Independent Study
Spring 2012ISYE 315Production Planning and Control
Spring 2012ISYE 520Quality Assurance Systems
Spring 2012ISYE 699Advanced Independent Study
Fall 2011ISYE 315Production Planning and Control
Fall 2011ISYE 575Introduction to Quality Engineering
Fall 2011ISYE 699Advanced Independent Study
Spring 2011ISYE 315Production Planning and Control
Spring 2011ISYE 520Quality Assurance Systems
Spring 2011ISYE 699Advanced Independent Study
Fall 2010ISYE 315Production Planning and Control
Fall 2010ISYE 575Introduction to Quality Engineering
Fall 2010ISYE 699Advanced Independent Study
Spring 2010ISYE 315Production Planning and Control
Spring 2010ISYE 520Quality Assurance Systems
Fall 2009ISYE 315Production Planning and Control
Fall 2009ISYE 575Introduction to Quality Engineering
Spring 2009ISYE 315Production Planning and Control
Spring 2009ISYE 520Quality Assurance Systems
Fall 2008ISYE 315Production Planning and Control

Teaching history may be incomplete. Course pages contain course-specific feedback and citations.

Instructor identity & provenance 
{
  "instructor_uid": "instructor_f645bfc3aa59566d7d1017fe",
  "source": "madgrades",
  "source_instructor_id": "671929",
  "identity_basis": "source_id",
  "identity_status": "source_identified",
  "name": "TERRY MANN",
  "email": null,
  "first_observed_at": "2026-09-06 23:14:58.172943+00:00",
  "last_observed_at": "2026-09-07 15:55:43.033547+00:00",
  "ratings": {
    "review_count": 20,
    "quality": 4.3,
    "difficulty": 2.05,
    "quality_count": 20,
    "difficulty_count": 20,
    "profile_id": "rmp:1357774",
    "source_url": "https://www.ratemyprofessors.com/professor/1357774",
    "match_basis": "exact_name",
    "observed_at": "2026-09-07 16:02:24.766085+00:00",
    "courses": {
      "course_9d2db43001abbe58247267ec": {
        "review_count": 15,
        "quality": 4.2,
        "difficulty": 2.27,
        "quality_count": 15,
        "difficulty_count": 15
      },
      "course_67568eb0b0c4c7027a6207cf": {
        "review_count": 1,
        "quality": 4,
        "difficulty": 3,
        "quality_count": 1,
        "difficulty_count": 1
      },
      "course_465855ee8f77f31be2f79f78": {
        "review_count": 2,
        "quality": 4.5,
        "difficulty": 1,
        "quality_count": 2,
        "difficulty_count": 2
      },
      "course_21f4d7c62e459c7d0516d7ba": {
        "review_count": 1,
        "quality": 5,
        "difficulty": 1,
        "quality_count": 1,
        "difficulty_count": 1
      }
    },
    "bayesian_quality": 3.9798428917732975,
    "prior_mean": 3.6596857835465957,
    "prior_weight": 20
  },
  "grade_statistics": {
    "gpa": 3.755,
    "graded": 4825,
    "counts": [
      3435,
      840,
      351,
      99,
      57,
      22,
      21
    ],
    "sections": 112
  },
  "current": false,
  "courses": [],
  "revision": "e243353dcb7d79b7247ced91d69443ef4c2a6349",
  "instructor_url": "/instructors/TERRY_MANN--instructor_f645bfc3aa59566d7d1017fe"
}